SPA-3102 Configuration for VoiceStick and InternetCalls

Step 1
Get an incoming number from http://www.voicestick.com. At this moment, I found this to be easiest to set and most reliable. You can sign-up for a free account without outgoing options. They will ask for Credit Card information for authentication but they won't charge unless you opt for some credits.

Step 2
Get an internet calls account from http://www.internetcalls.com for outgoing calls.

Step 3
Configure your SPA-3102 adaptor

1. After plugging in wires, in your internet browser go to http://192.168.0.1/admin/voice/advanced
   
2. Click on Line 1 Tab and update the following settings
   Proxy and Registration Section
   Proxy: i2telecom.com
   Use Outbound Proxy: Yes
   Outbound proxy: 206.165.50.116
   Use OB proxy in Dialog: Yes
   
   Subscriber Information section
   Display Name: Whatever you want
   User ID: Your voicestick number
   Password: Your voicestick password
   
   Gateway Accounts:
   Gateway1: sip.internetcalls.com
   GW1 Auth ID: your internetcalls username
   GW1 Password: your internetcalls password
   
   Dial Plan:
   Dial Plan:

   (000S0<:@gw0>|1xxxxxxxxxxS0<:@gw1>|<#9:>xx.<:@gw1>)

   
   Note: This dial plans means all the numbers with 000 will be routed through gateway 0 (PSTN) and all the numbers starting with 1 followed by 10 digit number will be dialled using gw1 - your internetcalls account. In addition, you can use #9 to get line 1.
   
3. Click on Submit all changes and should all be set to go.
4. Verify that Info page shows Registration State as Registered in Line 1 Status

Using SipNumber for incoming calls

Proxy and Registration Section
Proxy: proxy.freedigits.net
Use Outbound Proxy: Yes
Outbound proxy: outbound.freedigits.net
Use OB proxy in Dialog: Yes

Subscriber Information section
Display Name: Whatever you want
User ID: Your sipnumber number
Password: Your sipnumber password